165mm Plunge Cut Saw with Connector Case Non-Slip Rubberised Handles for Precision Control

• Close to wall cutting - Can perform a cut only 18mm away from the wall
• Depth Stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm
• Tip Resistant Design - sliding the lever prevents this tool from falling down towards blade case
• Non-Slip Rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use
• Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation
• Easy Blade Replacement Design - Lever locks blade in replacement position, hex wrench can be used through hole in casing and is stored afterwards in the handle

Comes with:

• Hex wrench
• Carbide tipped blade
• Connector carry case

Specification:

• Net weight: 4.2 kg
• Bore Diameter: 20mm
• Input wattage: 1300 w
• Noise K factor: 3 dB(A)
• Blade Diameter: 165mm
• Depth of Cut @ 45°: 39mm
• Vibration K factor: 1.5 m/sec_
• Noise sound power: 102 dB(A)
• Noise sound pressure: 91 dB(A)
• Bevel Cut Range: 1 - 48 Degrees
• No Load Speed: 2000 - 5200 rpm
• Vibration: Cutting Chipboard: 2.5 m/sec_
• 56mm max cut @ 90° / 40mm max cut @ 45° / 38mm @ 48°

Features:

• Close to wall cutting - Can perform a cut only 18mm away from the wall
• Depth Stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm
• Tip Resistant Design - sliding the lever prevents this tool from falling down towards blade case
• Non-Slip Rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use
• Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation
• Easy Blade Replacement Design - Lever locks blade in replacement position, hex wrench can be used through hole in casing and is stored afterwards in the handle

Comes with:

• Hex wrench
• Carbide tipped blade
• Connector carry case

Specification:

• Net weight: 4.2 kg
• Bore Diameter: 20mm
• Input wattage: 1300 w
• Noise K factor: 3 dB(A)
• Blade Diameter: 165mm
• Depth of Cut @ 45°: 39mm
• Vibration K factor: 1.5 m/sec_
• Noise sound power: 102 dB(A)
• Noise sound pressure: 91 dB(A)
• Bevel Cut Range: 1 - 48 Degrees
• No Load Speed: 2000 - 5200 rpm
• Vibration: Cutting Chipboard: 2.5 m/sec_
• 56mm max cut @ 90° / 40mm max cut @ 45° / 38mm @ 48°